Follow these steps for a quick Jitsi-Meet installation on a Debian-based GNU/Linux system. The following distributions are supported out-of-the-box:
- Debian 10 (Buster) or newer
- Ubuntu 22.04 (Jammy Jellyfish) or newer (Ubuntu 18.04 or 20.04 can be used, but Prosody must be updated to version 0.11+ before installation)
Many of the installation steps require
sudo access. So it's recommended to have
root access to your system.
Required packages and repository updates
You will need the following packages:
sudo=> Only needed if you use
wgetto Add the Jitsi package repository
OpenJDK 11 must be used.
Make sure your system is up-to-date and required packages are installed:
root or with
# Retrieve the latest package versions across all repositories
sudo apt update
# Ensure support for apt repositories served via HTTPS
sudo apt install apt-transport-https
On Ubuntu systems, Jitsi requires dependencies from Ubuntu's
universe package repository. To ensure this is enabled, run this command:
sudo apt-add-repository universe
Retrieve the latest package versions across all repositories:
sudo apt update
Install Jitsi Meet
Domain of your server and set up DNS
Decide what domain your server will use. For example,
Set a DNS A record for that domain, using:
- your server's public IP address, if it has its own public IP; or
- the public IP address of your router, if your server has a private (RFC1918) IP address (e.g. 192.168.1.2) and connects through your router via Network Address Translation (NAT).
If your computer/server or router has a dynamic IP address (the IP address changes constantly), you can use a dynamic dns-service instead. Example DuckDNS.
DNS Record Example:
|Record Type||Hostname||Public IP||TTL (Seconds)|
|Your Meeting Server Public IP (|
Set up the Fully Qualified Domain Name (FQDN) (optional)
If the machine used to host the Jitsi Meet instance has a FQDN (for example
meet.example.org) already set up in DNS, you can set it with the following command:
sudo hostnamectl set-hostname meet.example.org
Then add the same FQDN in the
x.x.x.x is your server's public IP address.
Finally on the same machine test that you can ping the FQDN with:
If all worked as expected, you should see:
Add the Prosody package repository
This will add the Prosody repository so that an up to date Prosody is installed, which is necessary for features including the lobby feature.
Ubuntu 18.04 and 20.04
echo deb http://packages.prosody.im/debian $(lsb_release -sc) main | sudo tee -a /etc/apt/sources.list
wget https://prosody.im/files/prosody-debian-packages.key -O- | sudo apt-key add -
sudo apt install lua5.2
sudo curl -sL https://prosody.im/files/prosody-debian-packages.key -o /etc/apt/keyrings/prosody-debian-packages.key
echo "deb [signed-by=/etc/apt/keyrings/prosody-debian-packages.key] http://packages.prosody.im/debian $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/prosody-debian-packages.list
sudo apt install lua5.2
Add the Jitsi package repository
This will add the jitsi repository to your package sources to make the Jitsi Meet packages available.
Ubuntu 18.04 and 20.04
curl https://download.jitsi.org/jitsi-key.gpg.key | sudo sh -c 'gpg --dearmor > /usr/share/keyrings/jitsi-keyring.gpg'
echo 'deb [signed-by=/usr/share/keyrings/jitsi-keyring.gpg] https://download.jitsi.org stable/' | sudo tee /etc/apt/sources.list.d/jitsi-stable.list > /dev/null
curl -sL https://download.jitsi.org/jitsi-key.gpg.key | sudo sh -c 'gpg --dearmor > /usr/share/keyrings/jitsi-keyring.gpg'
echo "deb [signed-by=/usr/share/keyrings/jitsi-keyring.gpg] https://download.jitsi.org stable/" | sudo tee /etc/apt/sources.list.d/jitsi-stable.list
Update all package sources:
sudo apt update
Setup and configure your firewall
The following ports need to be open in your firewall, to allow traffic to the Jitsi Meet server:
80 TCP=> For SSL certificate verification / renewal with Let's Encrypt. Required
443 TCP=> For general access to Jitsi Meet. Required
10000 UDP=> For General Network Audio/Video Meetings. Required
22 TCP=> For Accessing your Server using SSH (change the port accordingly if it's not 22). Required
3478 UDP=> For querying the stun server (coturn, optional, needs
config.jschange to enable it).
5349 TCP=> For fallback network video/audio communications over TCP (when UDP is blocked for example), served by coturn. Required
If you are using
ufw, you can use the following commands:
sudo ufw allow 80/tcp
sudo ufw allow 443/tcp
sudo ufw allow 10000/udp
sudo ufw allow 22/tcp
sudo ufw allow 3478/udp
sudo ufw allow 5349/tcp
sudo ufw enable
Check the firewall status with:
sudo ufw status verbose
Forward ports via your router
If you are running Jitsi Meet on a server behind NAT, forward the ports on your router to your server's IP address.
Note: if participants cannot see or hear each other, double check your firewall / NAT rules.
In order to have encrypted communications, you need a TLS certificate.
During installation of Jitsi Meet you can choose between different options:
The recommended option is to choose Let's Encrypt Certificate option
But if you want to use a different certificate you should get that certificate first and then install jitsi-meet and choose I want to use my own certificate.
You could also use the self-signed certificate(Generate a new self-signed certificate) but this is not recommended for the following reasons:
Using a self-signed certificate will result in warnings being shown in your users browsers, because they cannot verify your server's identity.
Jitsi Meet mobile apps require a valid certificate signed by a trusted Certificate Authority and will not be able to connect to your server if you choose a self-signed certificate.
Install Jitsi Meet
If you are already running Nginx on port 443 on the same machine, turnserver configuration will be skipped as it will conflict with your current port 443.
# jitsi-meet installation
sudo apt install jitsi-meet
SSL/TLS certificate generation: You will be asked about SSL/TLS certificate generation. See above for details.
You will also be asked to enter the hostname of the Jitsi Meet instance. If you have a domain, use the specific domain name, for example:
Alternatively you can enter the IP address of the machine (if it is static or doesn't change).
This hostname will be used for virtualhost configuration inside Jitsi Meet and also, you and your correspondents will be using it to access the web conferences.
Jitsi Meet server: Note: By default, anyone who has access to your Jitsi Meet server will be able to start a conference: if your server is open to the world, anyone can have a chat with anyone else. If you want to limit the ability to start a conference to registered users, follow the instructions to set up a secure domain.
Conferences/Rooms: The access control for conferences/rooms is managed in the rooms, you can set a password on the webpage of the specific room after creation. See the User Guide for details: https://jitsi.github.io/handbook/docs/user-guide/user-guide-start-a-jitsi-meeting
If the installation is on a machine behind NAT jitsi-videobridge should configure itself automatically on boot. If three way calls do not work, further configuration of jitsi-videobridge is needed in order for it to be accessible from outside.
Provided that all required ports are routed (forwarded) to the machine that it runs on. By default these ports are TCP/443 and UDP/10000.
The following extra lines need to be added to the file
And comment the existing
See the documentation of ice4j for details.
Default deployments will have low values for maximum processes and open files. For greater than 100 participants, change
To check values just run:
systemctl show --property DefaultLimitNPROC
systemctl show --property DefaultLimitNOFILE
systemctl show --property DefaultTasksMax
To load the values and check them see below for details.
To reload the systemd changes on a running system execute
sudo systemctl daemon-reload and
sudo systemctl restart jitsi-videobridge2.
To check the tasks part execute
sudo systemctl status jitsi-videobridge2 and you should see
Tasks: XX (limit: 65000).
To check the files and process part execute
cat /proc/`cat /var/run/jitsi-videobridge/jitsi-videobridge.pid`/limits and you should see:
Max processes 65000 65000 processes
Max open files 65000 65000 files
Confirm that your installation is working
Launch a web browser (such as Firefox, Chrome or Safari) and enter the hostname or IP address from the previous step into the address bar.
If you used a self-signed certificate (as opposed to using Let's Encrypt), your web browser will ask you to confirm that you trust the certificate. If you are testing from the iOS or Android app, it will probably fail at this point, if you are using a self-signed certificate.
You should see a web page prompting you to create a new meeting.
Make sure that you can successfully create a meeting and that other participants are able to join the session.
If this all worked, then congratulations! You have an operational Jitsi conference service.
sudo apt purge jigasi jitsi-meet jitsi-meet-web-config jitsi-meet-prosody jitsi-meet-turnserver jitsi-meet-web jicofo jitsi-videobridge2
Sometimes the following packages will fail to uninstall properly:
When this happens, just run the uninstall command a second time and it should be ok.
The reason for the failure is that sometimes the uninstall script is faster than the process that stops the daemons. The second run of the uninstall command fixes this, as by then the jigasi or jitsi-videobridge daemons are already stopped.
Web Browser: You can try to use a different web browser. Some versions of some browsers are known to have issues with Jitsi Meet.
WebRTC, Webcam and Microphone: You can also visit https://webrtc.github.io/samples/src/content/getusermedia/gum to test your browser's WebRTC support.
Firewall: If participants cannot see or hear each other, double check your firewall / NAT rules.
Nginx/Apache: As we prefer the usage of Nginx as webserver, the installer checks first for the presence of Nginx and then for Apache. In case you desperately need to enforce the usage of apache, try pre-setting the variable
Log files: Take a look at the various log files:
Adding sip-gateway to Jitsi Meet
Jigasi is a server-side application acting as a gateway to Jitsi Meet conferences. It allows regular SIP clients to join meetings and provides transcription capabilities.
sudo apt install jigasi
During the installation, you will be asked to enter your SIP account and password. This account will be used to invite the other SIP participants.
Reload Jitsi Meet
Launch again a browser with the Jitsi Meet URL and you'll see a telephone icon on the right end of the toolbar. Use it to invite SIP accounts to join the current conference.